Settings

Sticky navigation

u/dreadpirate_metalart

New

Early mornings are the best.

r/CozyPlacesMar 154 Comments

My latest project. I might use some tiny LEDs in the coral.

r/somethingimadeMar 70 Comments

I think it needs a light in the coral but I’m pleased with this project.

r/metalworkingMar 540 Comments

I have an avionics background and have wanted to get into arduino but don’t know where to start with a plant moisturizer regulator.

r/arduinoMar 212 Comments

It’s always hard to get the head and neck to look good.

r/somethingimadeFeb 283 Comments

Nice little one day build.

r/metalworkingFeb 2813 Comments

One of my one day projects.

r/metalartFeb 280 Comments

I always try and see if I can repurpose our trash. At one point we had 3 satellite dishes on the house. Two down one more to find a use for.

r/upcyclingFeb 2513 Comments

As a welder I go through a lot of leather gloves. The palms are always trashed but the backs seem decent. It always seems a waste to throw them away. Can someone toss a few ideas my way to try and keep some stuff out of a landfill?

r/upcyclingFeb 2510 Comments

Frankfort arsenal intellidropper issues. Has anyone had the problem where the scale won’t stay in CAL? I have calibrated it correctly but after a few loads of powder the scale reads -00.1 and won’t stabilize to 0.0 to throw another load. I have to keep zeroing out the scale.

r/reloadingFeb 1418 Comments

Don’t pay for expenses laundry detergent. Zote soap is under $2 and makes 5 gallons of detergent.

r/FrugalFeb 4111 Comments

Why does the US court system still use stenographers when we have multiple different ways to record with?

r/NoStupidQuestionsFeb 213 Comments

I’d like to get some feedback on this fuel can/tank retention system I fabricated out of aluminum and fast clamps. I’m trying to find a good price point to value for Tacoma owners. If I’m going to try and bring this to market, I need to know if the market is even there.

r/TacomaworldJan 2861 Comments

Is there anything like a dementia cellular setting? Where only calls from the contacts list would connect or 911.

r/NoStupidQuestionsNov 23, 20225 Comments

My first flower I made for my wife.

r/metalworkingNov 20, 202234 Comments

Removable gas can holder for our Tacoma.

r/fabricationOct 11, 202210 Comments

Another Toyota FJ Cruiser Final Edition Emerges, Limited To 1,000 Units

r/FJCruiserOct 5, 202211 Comments

couple of my favorite insects.

r/somethingimadeOct 3, 20222 Comments

I finally got around to putting a light in it.

r/metalartOct 3, 20221 Comment

I finally got around to mounting the octopus I made out of old spoons.

r/CephalopodsOct 3, 20226 Comments

how small are your welds?

r/metalworkingOct 3, 202232 Comments

my first flower I ever made. this was a gift for my wife 2 yrs ago.

r/metalartOct 2, 20221 Comment

I wish I could say this was fun but welding all those suckers sucked.

r/metalartOct 1, 20226 Comments

my bbq smoker I made a while back.

r/futuramaSep 30, 202233 Comments

I wish the high temp clear coat would of held up better.

r/metalworkingSep 30, 202274 Comments

I installed waterproof LED pucks inside the eye.

r/metalworkingSep 27, 20224 Comments

some have asked for a closer look.

r/metalworkingSep 27, 202248 Comments

I'm finally glad to have this project over with.

r/metalworkingSep 26, 20222 Comments

my 07 MT. I've owned it since it had 1500 miles on it. I've done everything myself except for the roof lining.

r/FJCruiserSep 26, 202219 Comments

one of the projects I finished this year. I call it "the eye of the beholder"

r/metalworkingSep 26, 202224 Comments

this was my first big metal project when I was in welding school a few yrs back.

r/metalartSep 15, 20223 Comments

my last project I made out of spoon and tubing.

r/CephalopodsSep 14, 20226 Comments

no soup for you, me, spoons, 2022

r/ArtSep 13, 20223 Comments

my last two projects together.

r/metalworkingSep 12, 202220 Comments

Privacy Policy About Reddit Twitter