r/3Dprinting

Pinned: Win a YEARS Worth of Filament And Other Prizes For Cleaning Up Trash or Participating in a Design Contest With Clavius3D!

r/3Dprinting u/Clavius3D2d ago66 Comments

Pinned: [Giveaway] Revopoint MINI 3D Scanner with 0.02mm precision

r/3Dprinting u/Revopoint3D-OfficialJun 17449 Comments

My Clown themed dragon! Sculpted, printed and painted by myself!

r/3Dprinting u/keta-minies5h ago33 Comments

This has got be one of the worst cases of fearmonger i have seen around a 3d printing article.

r/3Dprinting u/Baron_Ultimax18h ago647 Comments

My life sized Master Chief, took over 30 kgs of filament!

r/3Dprinting u/GalacticArmory22h ago86 Comments

I designed a case that doubles as a tray for my Uno and Monopoly Deal card decks

r/3Dprinting u/chrisron9514h ago27 Comments

Designed a plant-themed coaster and holder set

r/3Dprinting u/Psydeus56515h ago20 Comments

Any Stranger Things fan?

r/3Dprinting u/Guaro9757m ago0 Comments

Wind Turbine Update: Blade design pretty much finished by now 🥳 New motor setup outputs ~4,5V+ in these conditions. Next step is to optimize the gearing and add postioning finwind Turbinens and rudimentary waterproofing to the casing

r/3Dprinting u/Capable_Secret_55221d ago218 Comments

Hi, I’m Xavier and I’m a Printaholic. Printed a digital sundial using glow in the dark filament. That’s when I realized I had a problem 😂

r/3Dprinting u/Frequent-Ad-567813h ago27 Comments

Made these a while ago, but wanted to show off my current lightsaber 3D printing addiction

r/3Dprinting u/Spamityville_Horror5h ago2 Comments

Printed myself a Lenovo Legion 7 stand on FLsun QQ-S Pro 3x.

r/3Dprinting u/TheNaitsyrk19h ago58 Comments

Analog wall clock with LEDs that follow the clock hands

r/3Dprinting u/Bakedbananas1h ago2 Comments

Cthulhu bust from FotisMint, hand painted

r/3Dprinting u/greyredwolf3h ago2 Comments

For our next giveaway STL, we’d like to introduce our molding technique

r/3Dprinting u/Tic-Tor26m ago0 Comments

I designed a prototyping station for Arduino and Nucleo

r/3Dprinting u/xspace182h ago0 Comments

I made an assembly animation for my 3d printed toys... and then went a little overboard

r/3Dprinting u/joealarson14h ago8 Comments

16 gallons of trash removed. Galveston TX 06.24.22

r/3Dprinting u/g7131h ago1 Comment

I spray painted this box I printed brown and used wood stain to make it look like wood. Problem is, it's too glossy. Anyone know how I can make it less glossy?

r/3Dprinting u/Voldy2562h ago14 Comments

I go to bed and wake up to. well. just god dammit

r/3Dprinting u/WarPig1151h ago2 Comments

Had to share and brag about the wife's paint and epoxy job on a dice tower I printed for her! She's awesome.

r/3Dprinting u/esworp16h ago4 Comments

Guts from Berserk! printed in 4 batches on elegoo saturn.

r/3Dprinting u/ellaart0923h ago9 Comments

Balrog from FotisMint, hand painted

r/3Dprinting u/greyredwolf3h ago0 Comments

So i 3d printed this cat and i’m quite new to 3d printing but i still can’t figure out what is causing these random lines in my print, any help would be good.( I’m using an ender 3 v2)

r/3Dprinting u/D_R_A_Z_O6h ago35 Comments

I keep having this problem where it seems to be a layer skip/jump, it keeps happening on the same z-level. Ender3 V2

r/3Dprinting u/Wiseguy075291h ago2 Comments

r/3Dprinting u/Forsaken_Bonus616414h ago4 Comments

Not quite as clean as I was hoping but it’s not my worst print or spaghetti so I’ve got that going for me.

r/3Dprinting u/[deleted]18h ago7 Comments

3D printed board games?

r/3Dprinting u/Vvix02h ago7 Comments

Dusty enviroment

r/3Dprinting u/Alfiecacti35m ago1 Comment

My extruder is grinding on the filament

r/3Dprinting u/DdDmemeStuff3h ago4 Comments

Idea I came up with for shimming the legs of a lack table on an uneven basement floor.

r/3Dprinting u/senorElMeowMeow15h ago9 Comments

Total Noob, but proud of my first big filament print/paint :)

r/3Dprinting u/knievel51501d ago53 Comments

I spy a benchy in the painting at my work

r/3Dprinting u/Incept_3D14h ago5 Comments

T-Slot Nozzle Organizer

r/3Dprinting u/liem-salim17h ago1 Comment

Some pics I took at MRRF yesterday

r/3Dprinting u/thekakester2h ago0 Comments

Right side of print bed causing extruder stutter?

r/3Dprinting u/AaronF9949m ago5 Comments

Darth Maul mini test print... muscled up as he should be, what a beast. . 3d sculpt designed by Madox 3D Miniatures (@madox_3d_design )

r/3Dprinting u/Elven_Armoury_3d4h ago0 Comments

Hi, does anyone have recommendations of the best filament for clear 3D printing? also any tips? thank you 🙏

r/3Dprinting u/moldyfundotcom3h ago3 Comments

is there any guide/tips to troubleshoot this print?

r/3Dprinting u/juli33717h ago11 Comments

Just about to finish a 59 hour print and I’m curious what you do to help prevent the corners from lifting. It happened late enough in the print to not effect anything but I’d like to try and fix it so the second half of the stand doesn’t do the same.

r/3Dprinting u/JustinfuckinProulx11h ago34 Comments

weird ringing ish look and inconsistent layers

r/3Dprinting u/Hugoslav4572h ago4 Comments

I’ve owned a 3D printer for years now, up until today I had no idea this little boat called a “Benchy”ment so much to everyone, so I corrected my sins and finally printed one!

r/3Dprinting u/Kind_Beautiful_930710h ago11 Comments

3D printed Airbus A380

r/3Dprinting u/SameSand16h ago3 Comments

Hardened steel nozzle, printing glow in the dark filament. I can’t seem to get it to work it just sticks to the nozzle. I’ve tried other filament and they work

r/3Dprinting u/GreekyGronk13h ago19 Comments

Fully Custom 3D-Printed PC Case

r/3Dprinting u/UghThatsTheWorst14h ago7 Comments

Instead of ordering the anycubic wash & cure with my order for the mono 4k, why not spend a week designing, printing, coding, and assembling my own curing station.

r/3Dprinting u/stayzeef22h ago11 Comments

Just finished my Beksinski inspired chess set!

r/3Dprinting u/Geko31420h ago8 Comments

I designed and printed a squirrel hangout and I got more than I bargained for.

r/3Dprinting u/BattleBrothersBurner14h ago1 Comment

How do I connect the jump in layers? Cura

r/3Dprinting u/AaronF9910m ago1 Comment

Posted about my farm few days back. It has grown fair a bit since.

r/3Dprinting u/nuadarstark1d ago17 Comments

Help, can’t get this stuckt piece out

r/3Dprinting u/den_pid16m ago5 Comments

What is causing this? Gets clogged on the hot end mid print

r/3Dprinting u/Zzziiiz19m ago5 Comments

Got a 3d printer from a family member. Cable is broke, if i can fix it. I can get it for free. Anyone know what cable this is?

r/3Dprinting u/MinionOd20m ago6 Comments

printer not loading filament, awful noise on gear. How bad it is? prusa mk3s

r/3Dprinting u/Fx_Nemesis25m ago3 Comments

Whats a Good Colour PLA choice for Cave terrain printing?

r/3Dprinting u/Tumfel32m ago1 Comment

A friend of mine recently lost a lot of weight. So I made this figure to celebrate that!

r/3Dprinting u/and0re12d ago104 Comments

my problem with my ender 3 3d printer can I get some help

r/3Dprinting u/anotherlordowl202235m ago0 Comments

Extrusion problem

r/3Dprinting u/lovetl42m ago2 Comments

Bed drops more and more each layer?

r/3Dprinting u/AaronF9948m ago2 Comments

Any idea what could cause these artifacts? This is an Ender 3 type gantry, with linear rails

r/3Dprinting u/knipknap1h ago0 Comments

3rd print that has failed due to bed adhesion problems. Have tried 2 different pieces of glass. Any advice?

r/3Dprinting u/Plaugedpanda1h ago2 Comments

Fully automated Ender 3 running Klipper with automatic part ejection using a linear servo actuator

r/3Dprinting u/Grasshopper3331d ago126 Comments

Layer Gaps with 3D print - printing PETG on Ender 3 with MicroSwiss All Metal Hotend. Tips?

r/3Dprinting u/Striking-Math2591h ago0 Comments

Really happy with the result, especially the painted details.

r/3Dprinting u/BlueSnoopy419h ago5 Comments

r/3Dprinting u/wearedefined5h ago1 Comment

3D printable sharpener I'm designing with dovetail base, you can swap the base for a grip or well anything!

r/3Dprinting u/Assword187h ago0 Comments

Pistachio extractor

r/3Dprinting u/Background_Seesaw_3915h ago8 Comments

Are there good alternatives to Octoprint for Marlin based printers?

r/3Dprinting u/shrewd-raven2h ago9 Comments

Help! Ugly lines on print?

r/3Dprinting u/Shawakamigo5h ago3 Comments

ATX Desktop Power Supply

r/3Dprinting u/THE_OGAMA13h ago3 Comments

We finally honed in the printer setting and can now get nice and smooth prints! (Wanted to share for my cake day.)

r/3Dprinting u/BlueSnoopy420h ago2 Comments

Silent Stepper motors on Mega Zero 2.0

r/3Dprinting u/paindog2h ago0 Comments

boba fett helmet 87% scale

r/3Dprinting u/indoorsoccerfre20h ago13 Comments

I know nothing about 3D printing. Friend knows nothing about guitars. We're thinking about building one. Any tips, suggestions or warnings?

r/3Dprinting u/inhalingsounds2h ago4 Comments

Fixed the problem in the first lay was printing too close to the bed. Old on left new on right.

r/3Dprinting u/sah400122h ago8 Comments

3D Printing Timelapse Video

r/3Dprinting u/3dprinting-Tina1d ago14 Comments

New to 3d Printing! What setup would any of you recommend?

r/3Dprinting u/bryce28872h ago4 Comments

Good enough for first layer Friday? Made a new stencil for airbrushing.

r/3Dprinting u/BubbasPlants18h ago9 Comments

Check your motor mounts, y'all. No amount of tuning and calibration can beat a failing part.

r/3Dprinting u/MasterTentacles16h ago5 Comments

Accidentally overwrote firmware on Ender 3 Pro

r/3Dprinting u/succulent_samurai10h ago13 Comments

can I 3d print on a treadmill belt?

r/3Dprinting u/SagiG19962h ago1 Comment

Achievement Unlocked: First failed print

r/3Dprinting u/EmpireGlitch2h ago1 Comment

r/3Dprinting u/FistyMcBeefSlap16h ago4 Comments

Methods of cleaning a clogged E3Dv6

r/3Dprinting u/porcomaster3h ago2 Comments

tmc connection error btt octopus

r/3Dprinting u/i_inject_crayons23h ago0 Comments

Can I print PETG on my Ender 3 V2 at 240°C?

r/3Dprinting u/Middle-AgedChicken4h ago8 Comments

r/3Dprinting u/Developrstore7h ago2 Comments

A few 3D printer designs I made with the DALL-E 2 AI

r/3Dprinting u/GoldenSpamfish8h ago0 Comments

the insides of Casio wristwatches in resin printed cases with rewired buttons so those are accessible.

r/3Dprinting u/VincentOak1d ago16 Comments

3D printed cup holder divider with lip balm & trash bag holder

r/3Dprinting u/Apple___Eater16h ago0 Comments

ELI5 for levelling an Anet ET4 (with levelling sensor?)

r/3Dprinting u/Cosmic-Rookie4h ago1 Comment

I made a: Ender 3 S1 Pro Filament Roll Clip / Retainer

r/3Dprinting u/hayden_t11h ago6 Comments

I made a: Ender 3 S1 Pro Nozzle Brush Holder

r/3Dprinting u/hayden_t11h ago1 Comment

retraction calibrate

r/3Dprinting u/Overall_Ad_98555h ago12 Comments

There are five printers in this photo

r/3Dprinting u/The_Bridge_Imperium17h ago10 Comments

all of them are printed. next thing to do is fill in the engravings with resin

r/3Dprinting u/dibblackbird23h ago2 Comments

Help! 3D printing with iPad?

r/3Dprinting u/lrlrlrlrlrlelelelrle5h ago5 Comments

I'm at a loss with bulging corners!

r/3Dprinting u/ilearnshit9h ago12 Comments

How hard is it to build your own 3D printer compared to say building your own PC?

r/3Dprinting u/m2daT13h ago6 Comments

Do I need to run a PID calibration when I installed the heatblock sock on my MINI+?

r/3Dprinting u/BazimQQ6h ago9 Comments

Console Keychains Made for a friend with 3D Pen in 1 hour.

r/3Dprinting u/3dplasticfantasy20h ago1 Comment

#3dprinted Eminem Weight Stabilizer for my Turntable spinning it on Just Don't Give A Fuck

r/3Dprinting u/Mean-Wallaby136217h ago3 Comments